In August, I made a post saying I went for a job interview, but didn’t get the job.
Well, it turned out I did get it after all. It’s quite typical really. I even decided that I might stop looking for a while and concentrate on sewing and furthering my language/translation skills, as the job hunt was so stressful and I didn’t seem to be the right candidate anywhere. Then I got a call. I had been told that someone else was more suitable, but now it seemed they had taken another job.
So if you were wondering where I have been for the last three months, I have been doing some bookkeeping and general administration for a Swiss company.
As that only takes up some of my time, I have also been doing a lot of self-drafting, perfecting patterns to fit me better, and completely ruining making a coat by thinking I was being creative, but really being impractical. 😉
So I’ve been quite busy, just not blogging about it. That will change though, I promise.
Currently, I am self-drafting a dress for the office Christmas party, which is going well so far. I will make a post about it once it is done.
And then I also bought a new sewing machine. Well, a used sewing machine. It is a Bernina 1070 and I will also post about it, reviewing it thoroughly and explaining why I got it instead of a brand-new machine.
Once you find a pattern that suits you, you can never have too many dresses made from it. Butterick B5209 is the kind of pattern for which that statement holds true for me. I spend lots of my time trying to find new patterns, but I often tend to find that rather than trying them out, I end up just adapting one I already own. I love B5209 for its almost-70s silhouette and keep making changes to it with every new dress.
This version not only has added sleeves, but I also found a way to incorporate that gathered front detail which I first encountered in this dress. I made it for a job interview, and although I did not get the job, I got a compliment from my mum, saying how smart I look in it. Seeing that she is quite hard to please, that is quite an achievement in itself.
I am sure though that the “smartness” of this dress is mostly due to the great fabric I bought. I used sateen for the first time, and while it is a bugger to iron (it just loves to crease, as you can see in the pictures), it has a rather lovely sheen and weight to it. It looks expensive, so to speak. Which is not to say that it isn’t. 😉 Two metres of this set me back 48 CHF, which is probably at the lower end of what I would have spent on a smart-looking dress, if I had bought one. Obviously, I still had to put the work in, but I would rather spend three days making this than going to all the shops around town for a day and probably coming back empty-handed anyway.
The front section is made up of a normal pattern piece and the same piece elongated (to about twice the length of the original piece). The longer piece is gathered and then stitched along the edges of the smaller piece.
The sleeves are self-drafted puff sleeves. I made them quite short, but wide. My normal puff sleeve pattern had too much height and while starting out with it, I found that combined with the bulkiness of the sateen, it added too much volume at the top of the sleeve, giving the dress a sort of exaggerated 80s look. I actually finished them for the first time by sewing a tunnel and pulling elastic through. I really wanted to shir them and then hem them, but again, the fabric was too bulky to facilitate much of a gather that way.
The skirt is another self-drafted one. I wanted something a bit less full than I usually do, so I made sure to include darts at the back to make enough room.
Making this version of Butterick B5209 made me really want to sew up another maxi dress. I guess this is down to the fact that I already added to the length of the skirt for this one, which makes it really easy to imagine a floor-length skirt. I have no idea where I would wear such a dress though, to be honest, but I just love long ball gowns. I’m sure it would be a good bridesmaid’s dress too, in the long or the short version.
Self-drafted from a Burda pattern
I am sure we all have patterns we use all the time. Ones that just work for our body type, don’t need too much alteration and are simple to use. One of mine is a pattern printed in Burda Magazine Nr. 07/2014. It is a gathered skirt and simple bodice made up of 4 pattern pieces. I have used the bodice pattern countless times before, making many different types of dresses, and was always happy with the results.
So when I was looking for a pattern to make an alteration to, this came to mind quite quickly. I had this idea in mind that I would change the back of the dress to be a bit more open and airy. I wanted something that combines comfort with style in the summer heat, while also satisfying my love of geometry.
So here is the result, a slightly different dress with a geometric back detail.
And yes, I am starting with a picture from the back this time. 🙂 It is definitely nice from the front too, but the wow-factor is certainly going on in the back. The geometric pattern is made of 2 sets of 2 fully-lined triangles overlapping each other. The lower triangles are a bit smaller than the top ones. Here is the back in a bit more detail.
I did not have quite enough of the patterned fabric to make the whole dress, so I used just a strip of it for the skirt, while making the rest in a plain black polycotton. I think the whole dress has got a sort of folklore feeling about it because of that.
Including a lot of gathers… and some shirring
It’s the summer! So last week, while sweating profusely and sipping a cold drink, I remembered that I have a summer dress that is perfect for this kind of weather. It is light and airy, made of super fine cotton and is simply gathered in the middle.
So I went to look for said dress and had to discover that all of the elastic had gone in the shirred lower back, so that I now had a dress that was absolutely massive on me. My first thought was to simply replace said elastic, but then I realised that I would have to take the back section out in order to shirr it.
So what is the next logical step in this case? Take the whole dress apart, draft a pattern from it and make a completely new dress? Yes, very much so.
I did consider drafting a pattern without taking it apart, but:
- I would have to unpick some of it anyway to fix the elastic
- The dress had so much gatherin going on, there was no way I could draft a pattern without seeing the full width of the pieces.
- I had had some fit issues with this dress, which would be easier to fix if I could see the actual pattern pieces
- I had probably had this summer dress for about 6 or 7 years, so it was time for an update
There is a lot of gathering involved in this dress. Both back pieces (upper bodice and skirt) are simply sewn onto the shirring, so they are gathered automatically by that.
The upper front bodice is gathered both at the shoulder and the bust. (I took the opportunity to make this pattern piece a little bit longer to accommodate my bust better.) The front skirt panel is also gathered at the waist. The front lower bodice is made of two panels, one is longer and must be gathered at the sides, then sewn on top of the smaller piece. This is certainly a technique I had not used before, but will absolutely be using again. I love the look of the waist on this dress.
Oh, did I mention it has pockets? I often forego pockets, as I usually carry around a small bag anyway and am far too afraid to lose anything out of pockets, but they are useful for sticking your hands in when you don’t know what to do with them…
Isn’t this fabric the cutest? It looks a bit like I made a dress out of candy. 🙂
So is this dress as good as the original?
I would say it’s better! It is more colourful (the original was made in a military green) and the fit is improved. I am definitely considering making this again in other colours.